

Imagine, after traveling all day, all you can think about is a hot shower, but upon stepping into your shower the water pressure is anemic, the flow pencil-thin; this is not what you were expecting. Now, what do you do? Many homeowners in Naples and Marco Island are seasonal, sometimes gone for 8 months at a time.
One of the most common problems homeowners face when returning home after an extended period of time is a lack of water pressure in their sinks, faucets, showers, and tubs. This lack of water pressure or outright clogging is caused by sediment. Due to the lack of use, sediment will settle at the bottom of the hot water heater which then comes pouring out when the water is turned back on.
As a Home Watch Company, we try to educate our clients on typical issues they may face, best practices to reduce the cause of these issues, and solutions on how to address them when they do.
Most hot water heaters in Naples and Marco Island are tank-based, most often found in condos; therefore, one of the more common issues when a homeowner is gone for prolonged periods of time is sediment building up in the hot water tank.

Many homeowners do not realize that the water in the tank is not pure water but a mixture which contains particles such as dirt that are evenly dispersed throughout the tank, invisible to the naked eye that you cannot see when you take a shower or drink a cup of water.
However, as the mixture sits, the weight of those particles sinks to the bottom and accumulates.
Further, every faucet and shower head have an aerator/cartridge, the purpose of this filter is to do exactly that, remove sediment from the potable water before use. These simple items ensure fresh and healthy water!
These aerator/cartridges are not visible, but if you reach your finger underneath the mouth of the faucets you will be able to feel the mesh aerator/cartridge that is helping protect you.
The amount and volume of accumulated sediment is so substantial it gets caught in these aerator/cartridges restricting water flow, causing the anemic water pressure or outright clogs that homeowners experience when coming back.
So what can you do? When you return to paradise, the best way to prevent clogs and restricted water flow is to slowly and simultaneously run water through the hot water side of your tubs and sinks. Run water through the shower heads last, as these devices have the finest aerators/cartridges and thus most prone to clogging. The more water sources running at the same time the better.
Running multiple water sources concurrently spread the flow of water across multiple aerator/cartridges, greatly relieving the volume of accumulated sediment flowing through any one aerator/cartridge, which significantly reduces the risk of clogging and restricted water flow.
Further, during weekly Home Watch Visits while the homeowner is gone, the Home Watch Company should also be running water through the hot water side of every faucet. Sediment will still accumulate naturally over time, but this will greatly reduce the rate of accumulation.
It is important to confirm that your Home Watch technician is completing this task on every visit. Here at Halo Home Watch, we run the water through the hot water side not just because we want hot water, but to help circulate and replace the stagnant water in the tank which prevents sulfur smells and sediment build up.
In fact, when you leave, if you have a tank-based hot water heater make sure it is OFF at the breaker if electric or on vacation or pilot if gas to prevent a fire or explosion.

Click here to learn more about how to set your Hot Water Heater when you are away.
If you notice low water pressure or clogging in faucets or showers, what can you do? Remove and clean each aerator/cartridge, then gently replace back. Voila! Water pressure is restored! This can be done by using the following tools. Turn off the water supply at the source before attempting and be careful not to cause any damage.
Tools
The video shows how to remove and replace the aerator from a faucet and how much of an impact it can make!
Next is a video on how to remove and change a shower cartridge.
If you are not comfortable removing or replacing aerators or cartridges, a plumber or handyman is a great resource. Shower cartridges can be more involved than an aerator, making a plumber best suited to address this issue.
Good Home Watch Companies will have a preferred vendor list they share with their clients for everything from Air Conditions to Seawalls, including plumbers!
Also, most Home Watch Companies offer coordination and concierge services to schedule vendors and ensure the work is completed if homeowners are not comfortable or do not have the time to do so themselves.
Next time, when coming back for season, before you jump into that shower, slowly run the water through the hot water side of your tubs and sinks to circulate the tank and spread the accumulated sediment across multiple aerators/cartridges to reduce the chance of a clog. Remember, run hot water through your shower last!
Make sure your home watch company helps by running water each visit through the hot water side too. However, do not panic, if you find yourself with no or low water pressure, it’s most likely due to the aerator/cartridge becoming clogged from all that sediment which happens naturally over time.
Gently remove and clean the aerator/cartridge yourself or have a trusted handyman or plumber assist. Remember, shower cartridges can be much more challenging than faucets, we recommend a plumber, so no damage is caused.
Home Watch Companies should be able to provide homeowners with the appropriate vendors and even offer services to coordinate and supervise too.
Nobody likes coming home after a long day of travel to a disappointing shower!
to save your favourite homes and more
Log in with emailDon't have an account? Sign up
Enter your email address and we will send you a link to change your password.
to save your favourite homes and more
Sign up with emailAlready have an account? Log in